Copying Mixed Size Originals Mixed Original Use the Mixed original mode with the document feeder or with Store mode to copy mixed size originals. Dust collected around the power plug and outlet may cause fire. If excessive current flows in the wall outlet, fire may result. If, however, you copy originals that have a dark background fairly frequently, re-install the machine in a dark location and facing a direction such that external light does not get into it, then carry out the installation survey once again. Copy print job E89-27 Count is made at E89-6.
The Stack mode is initially selected. Set value: -3 toward the lighter to +3 toward the darker 5. Check the staple position of the paper. A risk of fire exists. The Output Mode popup menu will be displayed.
When using the multi mode, press the button and enter the multi code according to the desired output check item load. If a bad smell of ozone is present in the following cases, ventilate the room. Note: Take care to avoid scratching the drum's light sensitive areas and the cleaning blade. A risk of electric shock exists. It is designed only for indicating the data on the screen. When closing the document feeder on a thick original e.
To perform another running test mode, repeat steps 3 to 6. To reset another adjustment item, repeat steps 4 to 5. Select the 1-2or 2-2copy mode and the desired paper size. Using the numeric keys, enter the multi code. Current can leak, leading to a risk of electric shock or fire. Checking before starting work Use this section for making adjustments and as a checklist before implementing corrective measures in the field. For details on positioning originals, see p.
Breathing large quantities of organic solvents can lead to discomfort. Use the control panel keypad to enter the page number. Ground terminal of wall outlet b. If it is not within specification, press the button while holding down the button. Since radiation emitted inside this copier is completely confined within ective housings and external covers, the laser beam cannot escape during any phase of normal user opera-.
The subsequent screen will be displayed to allow you to specify the selected stamp type. Management list This option outputs the machine status, counter information and history of jam and so on. When the copier is used in a poorly ventilated room b. Copy count screen by parts to be replaced named Press the arrow key to select the data to be set or changed. Drum related counter Drum counter, Drum drive counter.
Finish installation by reversing the sequence of the removal procedure. Enter the desired print quantity from the control panel keypad. To avoid injury from burns, do not begin work until the fixing unit has cooled down sufficiently. Repeat steps 5 to 9 until the re-start timing meets the standard value. A risk of fire exists. E89-21 Carriage return not possible error Operation abnormality when copying interrupt. Use only the staples supplied by us.
Telephone line ground A risk of electric shock or fire exists in the case of lightning. The Application Selection Screen will be restored. Copy count screen by parts to be replaced named Press the arrow key to select the data to be set or changed. Place 1,500 sheets of A3 20lbs or 3,000 sheets of A4 20lbs paper on the Elevator Tray. To select Stack mode, deselect all the output mode keys. Remove the drum unit from the main body. Whenever the wire is replaced, this adjust- ment must be implemented.