Remove the top shock mounting bolts from the inside mounting positions. This can cause serious injury or death. Check all the points listed in the Daily Pre-Ride Inspection section on page 32. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. Electrical circuits are off, except Acc, 12V.
Be sure to return to your dealership for all of your service needs during, and after, the warranty. Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings, valves and exhaust systems. After opening a bottle of brake fluid, always discard any unused portion. Copyright 2019 Service Manual Vault. Follow the instructions in this manual for loading, tire pressure, gear selection and speed. Reinstall the shock mounting bolts. The part number is printed on the label.
You are just one click away from the service manual you are searching for! Sit in the driver's seat and fasten the seat belt. You can pay for your Polaris Ranger service manual with Paypal or Visa, MasterCard or Discover. Always torque spark plugs to specification. When parking inside a garage or other structure, be sure that the structure is well venti- lated and that the vehicle is not close to any source of flame or sparks, including any appliance with pilot lights. Brake Pedal Throttle Depress the brake pedal to slow or stop the vehicle. Customer Service Polaris Ranger Service Manuals - Service Manual Vault has made every effort to make your Polaris Ranger service manual shopping experience as easy as possible.
The operating conditions of the machinery during testing: The vehicles were in like-new condition. Do Release Lever not attempt to dump or unload the vehicle while parked on an incline. Due to constant improvements in the design and quality of produc- tion components, some minor discrepancies may result between the actual vehicle and the information presented in this publication. Always follow proper procedures for turning. Practice turning at slow speeds before attempting to turn at faster speeds.
Stand clear and pull up on the cargo box release lever. Once again - Thank you for shopping at servicemanualvault. Apply Brake Pedal the brakes while starting the engine. Apply dielectric grease to the inside of each spark plug cap and reinstall the caps onto the plugs. Oil Check The front gearcase fill plug is located on the right side of the front gearcase. A collision or rollover can occur quickly, even during routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take proper precautions.
Never turn abruptly or at sharp angles. Never remove the pressure cap while the engine is warm or hot. Cab nets must be used by both operator and passengers at all times. Always follow all tire maintenance procedures as outlined in this manual and on the labels on the vehicle. Polaris Ranger service manuals are available for immediate download! Performing the scheduled maintenance is very important. Federal law requires that this spark arrester be installed and functional when the vehicle is operated on public lands.
Always follow these precautions when hauling cargo: Never exceed the maximum weight capacity of the vehicle. Do not allow these types of products to contact the vehicle. All information contained within this publication is based on the latest product information at the time of publication. Avoid steep hills 15° maximum. Roll the seat forward to access the under-seat area. Sit in the driver's seat and fasten the seat belt. If it's impossible to bring the vehicle to your dealer before starting the engine, perform the service outlined on page 59, and take the vehicle to your dealer at the first opportunity.
Clean lights frequently and replace burned out lamps promptly. Brake Fluid Inspect the brake system routinely. The connections are behind the con- sole, under the dash. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. Always remove all cargo from the cargo box before lifting the box to access engine components. Always inspect left and right fields of vision before backing.
Headlight and taillight lenses become dirty during normal operation. The sealed battery is already filled with electrolyte and has been sealed and fully charged at the factory. Use the strap adjusters to tighten any loose straps. Reposition the shocks to the outside mounting holes. When operating on slippery surfaces such as ice or loose gravel, reduce speed and use extra caution to reduce the chance of skidding or sliding out of control. Polaris Ranger service manuals - the easy way! Do not operate on excessively slippery surfaces.
Always check for obstacles or people behind the vehicle. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effec- tiveness of the vehicle's emission controls. Lightly turn the steering wheel left and right. Serious burns could result from contact with the exhaust components. Make sure all passengers are at least 12 years of age and tall enough to comfortably and safely sit in a passenger seat with the seat belt secured, put both feet on the floor and grasp the hand hold. Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions: 1. Vehicle rollover could cause severe injury or death.